Characteristics and Storage Methods of PE Tarpaulin Production Materials

Among all the tarpaulins of different materials, PE tarpaulin should be regarded as one of the most widely used, and its production material is polyethylene. PE tarpaulin production material. 

Polyethylene is a typical thermoplastic, odorless, tasteless, non-toxic, flammable white powder. The molded PE resins are all waxy granules extruded and granulated, and the appearance is milky white. The melting point is 100-130℃, the low-temperature resistance is excellent, and the working temperature can reach -100～-70℃. It can still maintain good mechanical properties at -60℃, but the operating temperature is 80 to 110℃. It has good chemical stability. 

It is resistant to dilute nitric acid, dilute sulfuric acid, hydrochloric acid, hydrofluoric acid, phosphoric acid, formic acid, acetic acid, ammonia water, and ammonia water, hydrogen peroxide, sodium hydroxide, potassium hydroxide, and other solutions in room temperature.

The raw material of PE tarpaulin generally refers to the color striped cloth, which is coated with PE film on both sides of the PE woven cloth and is also used on the polypropylene woven cloth. The production process is wire drawing - circular woven cloth - double-sided lamination. This tarpaulin has poor waterproof performance. Generally, the waterproof performance after one use cannot be guaranteed. 

The disadvantage is that it is easy to wear. The advantage is lightweight, clean, and pollution-free. Generally used for temporary stacking, rainproof and dustproof, not suitable for long-term use in the open air.

The storage place must be ventilated, ventilated, protected from light, and clean. Adhere to ventilation during the day. Doors and windows should be closed on rainy days to keep items dry and avoid getting wet.

Pending area, good product area, and defective product area. When stacking items, be "small and large, light and heavy". Three principles should be adhered to during storage: fire prevention, water resistance, and pressure resistance; fixed-point and quantitative; first-in, first-out. Items in the warehouse are stored at room temperature. It is forbidden to place damp-prone items directly on the ground.

They should be placed on a shelf or tray for blocking. Common double-pole tents now support two poles at the same time when raising the pole; when closing the tent, dump the sand and debris in the tent; 

When pulling the tent, it is more important to choose a campsite, and try not to have too many sharp objects on the ground; Try not to cook in the tent; in order to protect the tent, you can lay a ground cloth under the tent; when putting down the tent, put down the two opposite corners of the tent first, and then put down the other two opposite corners. This tent is relatively flat.

The above describes the characteristics of PE tarpaulin production materials and storage methods. If you want to buy PE tarpaulin, please contact us.

SOUNDA is a leading custom PE tarpaulins wholesale manufacturer in China. After nearly 10 years of development, our products have been successfully sold to more than 130 countries on six continents. We are committed to providing customers with the most stable quality and the best service! We listen carefully to the voice of our customers, and we always strictly implement our commitment to our customers.