How Can We Better Apply Self-adhesive Vinyl?

There are many self-adhesive vinyl films on the market that contain different adhesive systems. Some self-adhesive vinyl films are equipped with standard adhesive systems for common applications. Use on low surface energy substrates, hard-to-stick surfaces, and structured surfaces will require different kinds of adhesive technologies. The followings are some of our tips to help you apply self-adhesive vinyl.

Remember to always refer to the material manufacturer's recommendations for the correct application temperature. This can usually be found in the corresponding installation guide or datasheet. Most products need to be applied at "room temperature"-usually in the range of 20-25°C-but some products can be used at temperatures as low as 5°C or even 0°C.

To ensure good adhesion, any surface where self-adhesive vinyl materials are to be used must be clean and free of dust, dirt, and surface treatment agents (such as wax or other contaminants). Regardless of the application, a professional surface cleaner should be used, even for short-term applications.

Before applying the graphics, the newly painted surface should be allowed to cure for an appropriate time (determined by the paint manufacturer). Attention should also be paid to the type of paint, as oil-based, water-based, and solvent-based paints have different requirements for any self-adhesive vinyl application.

Some surfaces may generate bubbles under the bonding of the self-adhesive vinyl, which may cause the adhesive to fail completely. These surfaces include fiberglass (uncoated), some polycarbonate and acrylic resins, and some surfaces that have been treated with silicone, wax, sealant or paint. Therefore, you must use the cleaning agent recommended by the vinyl manufacturer to thoroughly clean your surface.

Be careful when applying self-adhesive vinyl to other self-adhesive vinyl surfaces, including flexible truck sides, banners, and logo surfaces. These substrates contain plasticizers that can migrate into the applied self-adhesive vinyl film and destroy the adhesive system. Film shrinkage/delamination/adhesive "drawing" from the substrate is an indicator that plasticizer migration may occur.

Note: Once plasticizer migration occurs, it cannot be reversed or even prevented.

To avoid plasticizer migration, it is essential to select the correct vinyl for application to heavily plasticized substrates.

It is also important to ensure that when a self-adhesive vinyl is laid on top of another self-adhesive vinyl, the two products should have compatible chemistry. Otherwise, this can cause plasticizer migration resulting in shrinkage/delamination of self-adhesive vinyl and a breakdown of the adhesive system.

There are two recognized methods for applying self-adhesive vinyl: wet and dry. The method chosen will, to some extent, be determined by the size and complexity of the graphic is applied.

If you encounter any problems when using self-adhesive vinyl in accordance with the above methods, you can seek professional advice from Sounda. If you want to obtain further services, you can send us your needs, and we will give you a satisfactory answer in time.

As a professional manufacturer of advertising, digital printing, and construction materials, we always insist on providing customers with high-quality products. Sounda has become a leader in the industry by virtue of its excellent manufacturing technology and thoughtful service attitude. We always uphold a responsible attitude for users and strictly control the quality of our products. If you want to buy our self-adhesive vinyl, please contact us immediately!